Hook-and-Loop vs. PSA Sanding Discs
Start with the backing pad
Hook-and-loop and PSA describe how the disc attaches to the pad. Match that attachment before choosing the grit. A disc with the right diameter still needs the correct pad interface.
Hook-and-loop discs use a fastening layer on the reverse. PSA discs use a pressure-sensitive adhesive. Check the tool and pad instructions to identify which system your machine uses.
Compare the whole fit
| Selection point | Hook-and-loop | PSA |
|---|---|---|
| Attachment | Match the fastening layer to the specified pad. | Match the adhesive-backed disc to the specified pad surface. |
| Diameter | Use the disc diameter approved for the tool and pad. | Use the disc diameter approved for the tool and pad. |
| Dust extraction | Compare the disc's hole pattern or mesh construction with the approved system. | Compare the disc's hole pattern with the approved system. |
| Abrasive specification | Compare grain, grade, backing and listed material suitability. | Compare grain, grade, backing and listed material suitability. |
Keep attachment and abrasive performance separate
Choose the mounting system for the equipment. Then compare abrasive specifications for the workpiece and finish. To evaluate two products fairly, record the grit or grade, abrasive line, backing and application as well as attachment.
A change in mounting system can involve a different backing pad or manufacturer-approved accessory. Check that complete combination before converting a machine.
Reordering checklist
- Machine make and model.
- Backing pad part number and attachment.
- Disc diameter and hole pattern.
- Abrasive line, grade and manufacturer part number.
- Pack quantity, selling unit and order multiple.
If the current disc works well, photograph its front, reverse and package label. Those three views make a replacement easier to identify.
Shop hook-and-loop sanding discs
Editorial references